User manual

6-2. Basic Functions Of Keyboard From Synoptic
 Through keys advance () and return (), there is access to all the menus of the LCD panel, being
able to move from one to another.
 Through keys right () or left (), there is access to the screens of all the submenus of the LCD
panel, being able to move from one to another with themselves.
 Key ( ), has different purposes depending on the menu we are:
Setting values. Press key (ENT) to activate the function setting, the figures in the screen blink.
With keys ()-() the character to set is selected and with keys ()-() the value is selected. To
confirm press (ENT). Next field will blink, to continue doing settings proceed in the same way or
press (ESC) to return to no-setting situation..
Validation of orders or commands
 When pressing key (ESC) from any screen of any submenu, we go back to main screen (Screen
0.0), unless we are in any screen of «Parameters» menu and setting any of them. If so, the first
pulsation of key (ESC) will stop blinking the value, and second one to go back to main screen:
 Notes related with the screen map (see figure 29)
Some screens have a certain number of «–» characters. Each one of it, means one character so the
maximum length of the field will be determined by the number of them.
Each screen is labeled with a number located in its right bottom corner. It is only included as a mere
reference for its next description and explanation.
Note (*1): means the hidden programming screens through the password (*****) in «screen 1....».
This safety level avoids that non-authorized staff can alter or modify any setting.
(*1) screen 1.2
Safety Screen
Level numbering
Fig. 28. Notes related with the screens.
<ENT> TO CONFIRM
<ESC> TO CANCEL