User manual

The UPS supplies output voltage entirely protected against voltage variations, electric noise, etc.
 Wait for alarm message to appear:
screen*
 Battery fuse holder switch or switch from UPS (Q3) can only be turned «On» when the previous
alarm message has been cancelled.
 DO NOT TRY to close any battery fuse holder switch at any other moment, because this operation
could damage the equipment and/or cause possible accidents. They can only be turned on by
following the quoted previous steps
 The UPS supplies output voltage entirely protected against cuts, micro cuts, voltage variations,
electric noise, etc.
6. CONTROL PANEL AND DISPLAY DESCRIPTION
6-1. Control Panel Parts
(LED´s) LED indications:
(a) Rectifier Input Voltage OK (green).
(b) Unit on Bypass (orange).
(c) Inverter is working (green).
(d) Unit working from batteries -mains failure- (red).
(e) In case of any alarm of the unit (red).
(2) Character Display
(3) Keyboard
ENT «Enter» key. Confirmation of orders, program values (or other specified functions)

«Left» key for submenu navigation, or cursor displacement..

«Right» key for submenu navigation, or cursor displacement..

«Up» key for menu navigation, or digit modification.

«Down» key menu navigation, or digit modification
ESC «Escape» key. Return to main screen, cancel/finish programming (or other specified functions)
Fig. 27. Control panel parts.
BATT. SWITCH OPEN
SWITCH IT ON