User manual

GENERAL INDEX
1. INTRODUCTION
1-1. GRATEFULNESS LETTER
1-2. USİNG THİS MANUAL
1-2-1. Used Symbols
1-2-2. For More Information & Help
2. QUALITY AND STANDARD GUARANTEE
2-1. STANDARD
2-2. ENVİRONMENT
3. PRESENTATION
3-1. VİEWS
3-1-1. Views of the equipment
3-1-2. Corresponding legends to the equipment views
3-2. DEFİNİTİON AND STRUCTURE
3-2-1. Structural Scheme
3-3. OPERATİNG PRİNCİPLE
3-3-1. Normal operation, ()
3-3-2. Operation with mains failure, ()
3-3-3. Operation with inverter not active, ()
3-3-4. Operation in manual bypass, ()
4. INSTALLATION
4-1. IMPORTANT SAFETY INSTALLATİON
4-1-1. Batteries safety instructions
4-1-2. To get into account
4-2. EQUİPMENT RECEPTİON
4-2-1. Unpacking and content checking
4-2-2. Storage
4-2-3. Transport to location
4-2-4. Location
4-3. CONNECTİON
4-3-1. To the mains connection, terminals
4-3-2. Independent static bypass line connection, terminals (X14 to X17). Only in
versions UPS-B
4-3-3. Connection of the output, terminals (X6 to X9)
4-3-4. Connection main protective earthing terminal ( )and protective earth
bonding terminal ( )
4-3-5. COM port relays. Connector (X32)
4-3-6. Port COM RS-232 & RS-485. Connector (X32).
4-3-7. EPO terminals (X50)
5. OPERATION
5-1. START UP
5-1-1. Control before start up