User Manual

Valve: Inflation / Deflation

How to lock the valve in the OPEN and CLOSED position:

Remove the top cap and...

To OPEN: Push down and turn the gray button (in

the center of the valve). It should lock down. This

allows air in and out. Use for quick inflation (electric

pumps) and deflation.

To CLOSE: Push down and turn on the gray button.

It should pop back up. Use this position when using

hand pumps to fill, or to top off the pressure after the

electric pump.

NOTE: You may want to test opening and closing the valve several times

to get used to it.

QUICK INFLATION: Put valve in the OPEN position. Cover the opening

with the hose from an electric pump or shop vac. Fill with air. Once the

pump has reached its maximum pressure ability (or the mat has reached

the desired pressure), quickly CLOSE the valve. Finish topping off the

pressure with a hand pump.

HAND PUMP INFLATION: Put valve in the CLOSED position. Fill to the

desired pressure and remove the pump/adaptor from the valve by twist-

ing counter clockwise. No air should leak out from valve. If air does leak

the valve is in the OPEN position; twist the valve to the CLOSED position

and finish inflating.

ADJUST PRESSURE: To let pressure out, push down slightly on the gray

button.

*NOTE: Valve should always be in the

CLOSED position when done inflating,

then re-attach the top cap before using.