User Manual

ManualsBrandsTumbl Trak ManualsHealth & HouseholdSweet Spot with Hand Pump

Inflation & Troubleshooting Guide

Guide for the following products:

Air Floor, Air Floor PRO, Power Launch, Sweet Spot,

Jr. Sweet Spot & Launch Pad

Inside View of Fibers

Thank you for your purchase of a product that uses

Air Cushion Technology. Air Cushion Technology uses

a unique top and bottom material with strong woven

fibers in between (see photo at left). This guide will

help you get the most out of your product!

No fire/smoking

or excessive heat

No compressors

Not for

flotation

No sharp objects

including jewelry

Basic

Care

No dragging

or throwing

Adjustable valve

adaptor for all pumps

and products. You will

have to adjust the

combination of rings

for the correct fit.

Adaptor

NOTE: Tumbl Trak equipment is not recommended for

the use in Parkour/Free Running related activities.

Summary of content (4 pages)

PAGE 1
Inflation & Troubleshooting Guide Guide for the following products: Air Floor, Air Floor PRO, Power Launch, Sweet Spot, Jr. Sweet Spot & Launch Pad Inside View of Fibers 1 Thank you for your purchase of a product that uses Air Cushion Technology. Air Cushion Technology uses a unique top and bottom material with strong woven fibers in between (see photo at left).
PAGE 2
3 Pumps Magic Air Deluxe Electric Blower: Purchased separately for faster inflation/deflation. Airhead Superpump: Included with Air Floor PROs & Power Launch. Can be purchased separately for faster inflation/deflation. 16” Hand Pump: Included with Air Floors, Sweet Spots, Jr. Sweet Spots & Launch Pads 4 Gauge Included with your Air Floor Product is a Pressure Gauge to measure PSI (pounds/sq. in.). This Gauge easily attaches to your adjustable adapter as seen in the picture to the right.
PAGE 3
5 Valve: Inflation / Deflation How to lock the valve in the OPEN and CLOSED position: Remove the top cap and... To OPEN: Push down and turn the gray button (in the center of the valve). It should lock down. This allows air in and out. Use for quick inflation (electric pumps) and deflation. To CLOSE: Push down and turn on the gray button. It should pop back up. Use this position when using hand pumps to fill, or to top off the pressure after the electric pump.
PAGE 4
AIR CUSHION TECHNOLOGY Troubleshooting Guide The following is a question and answer guide. Q. After inflating my air unit I noticed all these bumps or “dimples” on the surface of the unit. Is this normal? A. This is normal. A pull of the threads inside causes the “dimples”. It does not interfere with the properties or efficiency of the unit. Q. When my athletes use the unit they bottom out. Is this normal? A. This is also normal. Most of the units are 2-3” thick.