SDS

Safety Data Sheet
Page 3 of 7
Tulip Dimensional Fabric Paint – S-21-0024
Butyl Rubber; Thickness: >0,4mm; Penetration Time: >30minutes.
Skin protection:
Skin protection products are not as effective as protective gloves, so suitable protective
gloves are preferred if possible.
Further information:
This product is classified as non-hazardous. However, the usual precautions for harmful
chemicals must be observed to avoid contact with the skin, eyes and respiratory tract.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical
state/appearance:
Liquid
Color:
Various
Odor:
Slight
Odor threshold:
N/A
pH:
N/A
Boiling point/range:
>212°F
Melting point/range:
<32°F
Flash point:
Not applicable (aqueous system)
Evaporation rate:
0.62
Vapor density (Air=1):
1
Solubility(ies):
Miscible in water
Vapor pressure:
17.5 mm Hg @20°C (68°F)
Relative density:
N/A
Viscosity:
N/A
Partition coefficient
(n-octanol/water), if
applicable:
N/A
Explosive properties:
N/A
Flammability: (solid,
gas)
N/A
Flammability limit in
air:
upper/lower
N/A
Autoignition
temperature:
N/A
Decomposition
temperature:
N/A
10. STABILITY AND REACTIVITY
Chemical stability:
Stable under normal temperatures
Conditions to avoid:
N/A
Incompatible materials:
N/A
Hazardous
decomposition
products:
At thermal decomposition temperature, carbon monoxide and carbon dioxide
Possibility of
hazardous reactions:
Will not occur
11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure:
Eye contact – serious
eye damage or irritation
Slight, transient
Skin contact – skin
corrosion, sensitization
or irritation:
No hazard in normal industrial use