User Manual

Page 2 of 2 - 10/10/2011 – Rev091211
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STAR TING INSTALLATION.
1. Flip both rear seats up so they are secured in the upright position.
2. Install the #5 mounting bracket using th e illustrated hardware to the OEM seat bracket #9.6. If the vehicle is equipped with a
subwoofer use the original OEM mounting bolt to fasten the #5 bracket instead of the hardware provided. (See Figure 1)
3. Remove the jack from the #9.1 jack mounting plate. Consult your Ford owner’s manual for removal instructions. (See Figure 1)
4. Remove the (3) #9.2 OEM original mounting bracket bolts securing the #9.1 jack mounting bracket to the vehicle. Leave the Jack
mounting plate #9.1 in the original location (See Figure 1)
Figure 1
5. Place the lockbox in the vehicle on top of the #9.1 jack mounting plate. (See Figure 2)
6. Fasten the lockbox to the top of the jack mounting plate using the #9.8 bolts and #9.9 washers. When tightening this hardware the
mounting brackets will bend to conform to the shape of the jack mounting plate. (See Figure 2)
7. Fasten the side of the lockbox to the #5 mounting bracket using the illustrated hardware. (See Figure 2)
8. Reinstall the jack into th e #9.1 jack mounting pl at e. (See Fi gu re 2)
9. Check the lock operation.
Figure 2
Call (970)564-1 762 for Technical Support