User Manual

Page 1 of 2 - 10/10/2011 – Rev091211

INSTALLATION INSTRUCTIONS

#285, Ford F150 Extended cab, under rear seat lockbox, with and w/o subwoofer

Please read and fill out the enclosed warranty registration card to activate your warranty.

PARTS CHECKLIST

LOCKBOX #285 #5 MOUNTING BRACKET

#9.8 (3) 8MM X 25MM BOLT #9.9 (3) 5/16” WASHER

#9.7 (2) ¼-20 X 3/4 BOLT #9.4 (2) ¼-20 NUT #9.5 (4) ¼” WASHERS

Tools needed for standard installation

 10mm Socket and Ratchet

 13mm Socket and Ratchet

 7/16” Socket and Ratchet

 7/16” Wrench

PAGE 1
INSTALLATION INSTRUCTIONS #285, Ford F150 Extended cab, under rear seat lockbox, with and w/o subwoofer Please read and fill out the enclosed warranty registration card to activate your warranty. PARTS CHECKLIST LOCKBOX #285 #5 MOUNTING BRACKET #9.8 (3) 8MM X 25MM BOLT #9.9 (3) 5/16” WASHER #9.7 (2) ¼-20 X 3/4 BOLT #9.
PAGE 2
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION. 1. 2. 3. 4. Flip both rear seats up so they are secured in the upright position. Install the #5 mounting bracket using the illustrated hardware to the OEM seat bracket #9.6. If the vehicle is equipped with a subwoofer use the original OEM mounting bolt to fasten the #5 bracket instead of the hardware provided. (See Figure 1) Remove the jack from the #9.1 jack mounting plate. Consult your Ford owner’s manual for removal instructions.