Manual

Page 2 of 2 - 1/28/2008 – Rev122006
4. Carefully push the glove box into the dash opening and line up the holes in the glove box to the
holes in the dash and the nuts in the mounting bracket. Use the 10-32 Button head screws to bolt
the glove box in. Hint: Start all screws a little bit before tightening any of them all the way down.
5. Check lock operation, Lock it Up!
ATTENTION:
FREQUENT LUBRICATION IS NECESSARY ON THE LOCKING SYSTEM
The pushbutton lock contains an “O” ring seal to protect the interior from dust and water. If this
mechanism is not lubricated regularly it will become difficult to operate and it may not return to its
home position preventing the key from operating the lock. If this happens simply pull up on the
pushbutton to manually bring it back to its home position. Lubricate the pushbutton with a light
lubricant such as silicone spray. The pushbutton may have to be periodically disassembled and
cleaned.
Call [phone] for Technical Support