Installation Guide

Place upright rails on side. Slide rails inside

uprights (Fig. 1).

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Align the rails to be 90º to the upright (Fig. 2.)

Install outside screws (Fig. 3).

Install adaptor strip. Install boards. Install

opposite adaptor strip. Install remaining upright

(Fig. 4)

Repeat Steps 2 & 3 for opposite gate upright.

90º

Adaptor

Strips

Adaptor

Strips

Boards

Upright

Option 1

Option 2

Upright

Determine Gate Opening:

Refer back to “How to Measure”

Gate opening is determined by width of gate plus clearance for

hinge, latch, and drop rod (latch and drop rod sold separately);

refer to latch and drop rod installation instructions for speci c

space requirements.

Determine

location and gate

opening before

installing fence.

Boards