Instructions / Assembly

6
Center-To-Center Post
Center-To-Center Post
Distance
Distance
8"
5.
6.
Measure center-to-center distance of following
post and dig hole accordingly (Fig. 18). Proceed
systematically with post, panel, post, etc.
Gate Install (If applicable):
Follow hinge and latch instructions included with
the Boerboel
®
gate hardware.
NOTE:
• For equal spacing we recommend the
bottom hinge be placed 6" from the bottom
gate upright, and the top hinge be placed 6"
from the top gate upright. Tabs on hinges
must rest  rmly against gate upright or
U-frame.
• Posts must be plumb and have set for
at least 24 hours in concrete prior to any
gate installation.
Panel/Post Cutting Tips:
If cutting down width of rails, new
17
⁄
17
⁄
17
64
⁄64⁄
" holes will
need to be drilled at end of rails 1
1
⁄
1
⁄
1
4
⁄4⁄
" down from
top, and
3
⁄
3
⁄
3
4
⁄4⁄
" in from end (Fig. 19).
If cutting down height of posts, new
17
⁄
17
⁄
17
64
⁄64⁄
" holes
will need to be drilled at end of posts
1
⁄
1
⁄
1
2
⁄2⁄
" in from
edges, and 1
5
⁄
5
⁄
5
16
⁄16⁄
" down from top (Fig. 20).
Fig. 18
Fig. 19
Fig. 20
1
1
⁄
1
⁄
1
4
⁄4⁄
"
3
⁄
3
⁄
3
4
⁄4⁄
"
17
⁄
17
⁄
17
64
⁄64⁄
"
Hole
17
⁄
17
⁄
17
64
⁄64⁄
"
Hole
Rail
Post
1
⁄
1
⁄
1
2
⁄2⁄
"
1
5
⁄
5
⁄
5
16
⁄16⁄