Instructions / Assembly

3
1.
2.
Mark the fence location using string and line
stakes (Fig. 1).
NOTE:
Plan gate placement, opening and hardware
clearance before installing fencing.
Fig. 1
Fig. 2
Example:Example:
Frost Line
Gravel/
Filler
6"
8"
X+Y
Y
X
3.
Fig. 4
Gravel
Concrete
Post
Insert 6" of gravel/ ller into the bottom of both
holes and insert posts. Add concrete to  rst post
hole according to manufacturer's instructions to
top of hole. Ensure  rst post is plumb and level. Let
concrete soft set making sure panel will be 2" above
ground (Fig. 3 & 4).
Repeat this process for second post hole. Be sure to
assemble panel before concrete in second hole dries.
Post Location:
Measure the width of the fence panel (X) plus the
width of the post (Y). This is the common center-
to-center measurement (unless there is a cut-down
panel) for post hole location (Fig. 2).
Post Installation:
Dig the  rst two post holes. Hole size should be
dug based on the following determination: Depth is
determined by your local frost line measurements
plus 6" for gravel/ ller (Fig. 3). Width is 8".
Fig. 3
2"