O W N E R’S M A N U A L 85" 80" 71 1/2" RSM-600 Basic Smith-Half Cage TuffStuff Fitness Equipment, Inc. 1325 E. Franklin Avenue Pomona, CA 91766, USA Ph: 909-629-1600 Fax: 909-629-4967 E-mail: service@tuffstuff.net Net: www.tuffstuff.
Introduction About the RSM-600 Prior to the Assembly of the Basic Smith-Half Cage T Tool Requirements Basic Smith-Half Cage Congratulations on your new purchase of the Basic Smith-Half Cage . We hope you are completely satisfied with this product and wish you many years of enjoyment. uffStuff Equipment This Tuffstuff product has been built to precise quality standards and has been carefully packaged to ensure that damage will not occur during shipment.
Part Two: Maintenance In this paragraph, we will discuss the inspection of the cables, pulleys and their associated components. If there exists the potential for injury to occur on a machine, it will most likely lie in the cable system. It is important to inspect the cables frequently and let it be known to all users that it is their responsibility to report any worn-out cable to prevent a sudden failure that can result in an injury.
Step 1 Step 1 Assembly List Item # Description 2 BOTTOM CROSS BRACE 3 BOTTOM SIDE FRAME LT 4 BOTTOM SIDE FRAME RT 37 43 56 63 Qty.
Step 2 Step 2 Assembly List Item # Description 16 SAFETY SPOTTER POST 37 40 50 Qty.
Step 3 18 8 6 55 15 55 4 8 16 18 6 55 15 55 21 Step 3 Item # 6 8 15 18 21 55 6 Assembly List Description PRESS BAR HOUSING RT LINEAR SHAFT 1 X 69 11/16 SAFETY SPOTTER BRACKET RT SHAFT RETAINER PLATE WEIGHT LIFT BAR RUBBER DONUT 1 X 2 1/2 Qty.
Step 4 8 6 21 18 3 5 Step 4 Item # 5 8 14 18 55 14 55 55 Assembly List Description PRESS BAR HOUSING LT LINEAR SHAFT 1 X 69 11/16 SAFETY SPOTTER BRACKET LT SHAFT RETAINER PLATE Qty. 1 1 1 1 RUBBER DONUT 1 X 2 1/2 2 8 8 21 18 5 55 3 14 55 NOTE: TWO PEOPLE ARE REQUIRED TO DO THIS STEP.
Step 5 Step 5 Assembly List Item # Description 1 BAR HOLDER 7 NICKLE FRONT UPRIGHT 19 SIDE BAR SAFETY SPOTTER 37 42 50 Qty. 2 2 2 FLAT WASHER SAE Z/P 3/8” HEX HEAD CAP SCREW 3/8-16 X 3 NYLON INSERT JAM LOCK NUT Z/P 3/8-16 8 4 4 1 19 1 7 7 19 42 42 37 37 42 42 4 37 37 37 50 37 3 37 NOTE: 1. SOME PARTS NOT SHOWN FOR CLARITY.
Step 6 Step 6 Assembly List Item # Description 9 OLYMPIC ADAPTER 1 X 8 10 REAR SIDE SUPPORT LT 11 REAR SIDE SUPPORT RT 36 37 39 40 42 43 50 58 62 63 Qty.
Step 7 Step 7 Assembly List Item # Description 9 OLYMPIC ADAPTER 1 X 8 18 SHAFT RETAINER PLATE 22 TOP STABILIZER 36 37 41 50 58 62 67 68 70 Qty.
Step 8 Step 8 Assembly List Item # Description 20 TOP CROSS BRACE 37 44 50 Qty.
36 67 50 37 44 37 37 37 43 50 36 70 52 22 70 36 52 37 50 43 20 37 50 50 37 50 37 10 36 37 62 68 68 62 67 57 52 62 39 58 9 60 51 37 44 40 39 36 43 63 37 23 58 9 62 36 42 60 63 43 37 53 3 28 63 37 41 41 59 37 37 37 63 2 43 43 63 50 37 19 42 40 42 37 37 18 50 37 37 47 41 56 21 26 72 27 59 54 12 37 19 8 34 37 53 40 65 51 66 58 51 66 58 47 55 55 49 49 55 49 37 37 54 25 47 42 27 15 48 42 13 48 54 5 50 8 7
RSM-600 Parts List COLOR CHART RSM-600 Parts List BOLD FONT = SUB-ASSEMBLY PARTS BLACK= HARDWARE ITEM DESCRIPTION REV2 REV PART NO. QTY ITEM DESCRIPTION PART NO.
DO NOT DISCARD THIS MANUAL HOME LIFETIME WARRANTY TuffStuff products are warranted to the retail purchaser to be free from defects in materials and workmanship. TuffStuff exclusive Home Lifetime Warranty coverage extends for the life of the product while owned by the original retail purchaser, and used only in a home or residential setting unless otherwise noted in the owner’s manual. This warranty does not cover: 1. TuffStuff products sold for and used in a commercial or institutional setting. 2.
