User guide

About the RLP-200 Leg Press / Hack Squat
Congratulations on your new purchase of the Leg Press / Hack
Squat. We hope you are completely satis ed with this product and
wish you many years of enjoyment.
TuffStuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will not
occur during shipment. The Home Lifetime Warranty and signature
indicating nal inspection has been conducted by our line foreman,
is an expression of our con dence in the completeness, the
materials, and workmanship of this product.
Warranty
SEE A COPY OF WARRANTY ON BACK PAGE.
Registration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on le with our factory,
be sure to complete the warranty registration card and send it to
TuffStuff Fitness Equipment today.
Prior to the Assembly of the Leg Press / Hack Squat
1. We advise you to consult your local TuffStuff retailer if you should
have a question or problem regarding the proper assembly of
this unit.
Tool Requirements
One 7/8” combination wrench1.
Two 3/4” combination wrenches2.
One 9/16” combination wrench3.
One ratchet4.
One 3/4” socket5.
One 9/16” socket6.
One 1/2” socket7.
Windex or household glass cleaner8.
Measuring tape9.
Utility knife10.
Rubber Mallet11.
S
C
R
E
WW
I
D
T
H
W
A
S
H
E
R
D
I
A
M
E
T
E
R
N
U
T
D
I
A
M
E
T
E
R
S
C
R
E
W
L
E
N
G
T
H
Hardware Measurement Diagram
Note: Due to continuing product improvements, speci cations and designs are subject to change
without notice.
Speci cations
1. Maximum Wt. Capacity - 500 lbs.
2. Total Machine Weight - 395 lbs.
3. Footprint (LWH) - See Front Cover.
2 RLP-200 Leg Press / Hack Squat
Introduction