AMERICA’S PREMIER EXERCISE EQUIPMENT OWNER’S MANUAL LEG EXT/CURL STATION AP-71LE Rev1 Revision Date 10-20-09
Introduction About the LEG EXT/CURL STATION. Congratulations on your new purchase of the LEG EXT/CURL STATION. We hope you are completely satisfied with this product and wish you many years of enjoyment. T uff Stuff Equipment This Tuffstuff product has been built to precise quality standards and has been carefully packaged to ensure that damage will not occur during shipment.
INDEX IMPORTANT ASSEMBLY INSTRUCTION NOTE..................4 FIRST STEPS FOR A SINGLE STATION...................................5 MULTIPLE STATION ASSEMBLY STEPS.................................7 LEG EXT/CURL CABLE CABLE...............................................11 EXPLODED VIEW.......................................................................15 PARTS LIST...................................................................................16 MAINTENANCE...............................................
IMPORTANT ASSEMBLY INSTRUCTION NOTE INSTRUCTIONS FOR A SINGLE STATION ASSEMBLY ONLY: FOR STEPS 1 AND 2 YOU WILL NEED SOME HARDWARE THAT IS PROVIDED IN THE AP-70RP BOX. ONCE YOU COMPLETE STEPS 1 AND 2 SKIP TO STEP 5 TO RESUME INSTALLATION. INSTRUCTIONS FOR A MULTI STATION ASSEMBLY ONLY: BEGIN ASSEMBLY IN STEP 3. FOR STEPS 3 AND 4 YOU WILL NEED SOME HARWARE THAT IS PROVIDED IN THE AP-70CP BOX.
STEP 1 Assembly List Item # B1 Description Qty.
AP-7000 SERIES LEG PRESS STATION B11 B7 88 11 21 68 88 88 60 STEP 2 55 55 11 25 27 23 44 50 B7 B11 B9 B8 RUBBER DONUT 3/4 X 2 1/2 10 LB STEEL WEIGHT PLATE BLACK 4 9/16 X 9 7/16 68 88 NYLON INSERT LOCK NUT N/P 3/8-16 DECAL-WEIGHT NUMBERS REF TP-10 (200 lbs) 50 60 BUTTON HEAD SCREW GR-8 N/P 3/8-16 X 5 44 FLAT WASHER N/P 3/4 X 2 10 LB TOP PLATE W/ADJ SLTR BAR 19 BLK WTS 27 55 SELECTOR PIN W/COIL 3/8 X 4 GOLD KNOB 25 GUIDE RODS 3/4 RD X 71 3/4 11 TOP GUIDE ROD HOUSING SO
STEP 3 Assembly List Item # Description Qty.
AP-7000 SERIES LEG PRESS STATION A8 A 10 A7 STEP 4 88 11 21 68 88 88 60 55 55 11 25 27 23 44 50 A 10 A7 A8 SELECTOR PIN W/COIL 3/8 X 4 GOLD KNOB 10 LB TOP PLATE W/ADJ SLTR BAR 19 BLK WTS BUTTON HEAD SCREW GR-8 N/P 3/8-16 X 5 DECAL-WEIGHT NUMBERS REF TP-10 (200 lbs) 25 27 44 50 RUBBER DONUT 3/4 X 2 1/2 10 LB STEEL WEIGHT PLATE BLACK 4 9/16 X 9 7/16 68 88 NYLON INSERT LOCK NUT N/P 3/8-16 TOP GUIDE ROD HOUSING 23 60 SPACER 1 ID X 1 1/4 OD X 2 21 FLAT WASHER N/P 3/4 X 2 GUID
AP-7000 SERIES LEG PRESS STATION 9 9 53 79 41 STEP 5 61 26 9 74 20 43 53 8 57 53 83 79 60 SIDE FRAME REINFORCEMENT PLATE 1/4 X 2 X 5 (3/8-16 TPI HLS) BUTTON HEAD SCREW GR-8 N/P 3/8-16 X 1 BUTTON HEAD SCREW GR-8 N/P 3/8-16 X 2 BUTTON HEAD SCREW GR-8 N/P 3/8-16 X 3 FLAT WASHER SAE N/P 3/8” BUTTON HEAD SCREW GR-8 N/P 3/8-16 X 2 3/4 FLAT WASHER N/P 3/8 ID X 1 1/2 OD X 3/16 NYLON INSERT LOCK NUT N/P 3/8-16 20 26 38 41 43 53 57 56 60 56 53 12 53 60 U-SHAPE WASHER N/P 3/8 ID X 1 1/2 OD X
STEP 6 Assembly List Item # Description Qty.
AP-7000 SERIES LEG PRESS STATION 11 61 7 C D A 61 B 60 53 E 36 53 40 33 7 89 76 NYLON INSERT LOCK NUT N/P 5/16-18 89 78 BLACK NYLON PULLEY 3/8 X 1 X 3 1/2 86 66 SPLIT LOCK WASHER N/P 1/2” 78 59 SPLIT HEX TAP BOLT GR-8 N/P 1/2-13 X 3 1/2 60 86 SPLIT BOLT GR-8 N/P 1/2-13 X 1 53 NYLON INSERT LOCK NUT N/P 3/8-16 60 77 SHOULDER BOLT N/P 3/8 X 1 1/8 59 76 FLAT WASHER SAE N/P 3/8” 53 ROD END 1/2-13 (3/8 HOLE) FINISHED HEX NUT N/P 1/2-13 51 66 BUTTON HEAD SCREW GR-8 N/P 3
STEP 8 Assembly List Item # Description Qty.
STEP 9 Assembly List Item # Description Qty. 10 FOAM ROLL 2 X 5 1/2 X 19 3/4 2 39 BUTTON HEAD SCREW GR-8 N/P 3/8-16 X 1 1/4 2 58 ALUMINUM WASHER 3/8 X 2.584 OD X .15 THK.
STEP 10 Assembly List Item # Description Qty.
85 84 82 40 30 65 19 23 73 75 54 53 60 64 71 32 52 60 61 32 53 35 2 30 75 35 41 44 11 88 56 67 53 24 9 25 9 82 50 60 53 29 29 79 72 75 22 79 39 38 14 10 58 53 74 40 53 56 10 61 86 24 35 75 13 38 79 88 38 35 88 37 79 35 20 27 15 56 35 31 1 60 34 16 79 84 30 57 37 5 83 36 53 4 30 43 79 39 62 8 33 70 60 68 53 81 55 60 55 54 21 56 69 12 75 38 53 28 60 3 79 75 63 53 60 18 6 38 53 42 60 20 26 17 39 49
COLOR CHART GRAY= SUB-ASSEMBLY PARTS BLACK= HARDWARE AP-71LE REV0 AP-71LE Parts List Item No.
Maintenance TuffStuff Basic Strength Equipment Safety and General Maintenance All TUFFSTUFF strength equipment is designed and manufactured to offer maximum, long-life service with minimal maintenance. However, safety inspection and routine maintenance in your facility should be the upmost importance in your daily operation. Information presented in these pages will serve as a basic guideline to design your own inspection procedures.
Maintenance Part Three: Lubrication Bearing and linear bearings systems have advanced over the years but they must be maintained on a regular basis if you expect them to last and perform efficiently. TuffStuff uses only the highest quality bearings and linear motion components that are virtually trouble-free but requires the regular preventive maintenance to insure long-lasting performance. 1.
DO NOT DISCARD THIS MANUAL TUFFSTUFF LIMITED WARRANTY TuffStuff warrants to the original purchaser that TuffStuff equipment will be free from defects in material and workmanship. All warranty periods begin to run from the date of delivery to the original purchaser. The warranty and remedies set forth herein are conditioned upon proper storage, installation, use and maintenance and conformance with any recommendations of TuffStuff.
