SDS
® Safety Data Sheet
The Armor All/STP Products Company
44 Old Ridgebury Road
Suite 300
Danbury, CT 06810
Tel. 1-203-205-2900
TUFF STUFF® Multi-Purpose Foam Cleaner Page 2 of 6
Response
IF ON SKIN: Wash with plenty of water and soap.
If skin irritation occurs: Get medical attention.
Take off contaminated clothing and wash it before
reuse.
IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
If eye irritation persists: Get medical attention.
Storage
Protect from sunlight. Do not exposure to temperatures
exceeding 50°C / 122°F.
Hazards not otherwise specified: None
Percentage of unknown toxicity: N/A
3. Composition/Information On Ingredients
Component
CAS No.
Amount
Isobutane (Propellant)
75-28-5
3-7%
Ethylene glycol monobutyl ether
111-76-2
1-3 %
Sodium metasilicate pentahydrate
6834-92-0
<1.0%
C12-15 Alcohol Ethoxylate
68131-39-5
<1.0%
The specific identity and/or exact percentage (concentration) of composition has been withheld as a trade
secret.
4. First Aid Measures
Inhalation: If symptoms of exposure develop, remove to fresh air. Seek medical attention if symptoms persist.
Skin Contact: Wash exposed skin with plenty of soap and water. Remove contaminated clothing, and launder
before reuse. If skin irritation or redness develops, seek medical attention.
Eye Contact: Flush eyes with large amounts of water for 15 minutes. If irritation or other symptoms persist, seek
medical attention.
Ingestion: If the victim is fully conscious, have them drink a glass of water. Get medical assistance by calling a
doctor or poison center. Never give anything by mouth to a person who is unconscious or drowsy.
Most Important Symptoms: Eye contact causes serious irritation. Causes skin irritation.
Indication of Immediate Medical Attention/Special Treatment: Immediate medical attention should not be
required.
5. Firefighting Measures
Suitable (and Unsuitable) Extinguishing Media: Use dry chemical, carbon dioxide, foam, or water spray.
Specific Hazards Arising from the Chemical: Contents under pressure. Keep away from ignition source and
open flames. Exposure of containers to heat and flames can cause them to rupture, often with violent force.






