Installation & Assembly

[ 7 ] SHORT with Nuts
4
Assemble the ROOF.
You will need these pieces:
Overlap the R2 roof panel
with the R1 roof panel.
Align the holes at the center.
Insert a short screw from the
top, and tighten the nut from
the underside.
]R
1
]R
2
]R
4
]R
3
Attach the R3 roof brace.
Make sure the top horizontal
flaps are oriented toward the
interior/ center, and the lower
horizontal flap is facing the
exterior/outer edge.
Align the holes and attach
with short screws from the top
and nuts from the underside.
Follow the same method to
attach the R4 roof brace.
Make sure the top horizontal
flaps are oriented toward the
interior/ center.