Assembly Instructions

Step 2
In a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Dog Bed and make sure all parts are adequately connected.
Place Cushion(C) onto Bed(A) as shown in picture.
Your Dog Bed is ready for use.
This Dog Bed can only be used on a flat, level surface.
Step 3
2.1) Pace Bed(A) facedown onto a clean, non-marring surface.
2.2) Attach Legs(B) to Bed(A) using Bolts(①), and Washers(②) with Allen Key(③) as
pictured above.
Do not fully tighten the Bolts.
2.1
2.2
Page 4 of 5