Assembly Instructions

Caution: You must read this before you proceed.

Dog Bed

Keep your child / children at bay in the process of assembly.

For turning the Dogbed and to prevent damage to the Dogbed, 02

persons may be needed to execute this action.

Page 1 of 5

CAUTION : This Dog bed is NOT a TOY.

PAGE 1
Assembly Instructions Caution: You must read this before you proceed. Dog Bed CAUTION : This Dog bed is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Dogbed and to prevent damage to the Dogbed, 02 persons may be needed to execute this action.
PAGE 2
Part List Label Picture Description Qty A Bed 1 B Leg 4 C Cushion 1 Description Qty ① Bolt (M6x20mm) 13 ② Washer (M6.
PAGE 3
Assembly Steps Overview Cushion (C) Bed (A) Leg (B) FRONT FACING This Dog Bed has multiple parts and may require up to 15 minutes to assemble. To give you an overview of the Dog Bed, the above picture to assemble to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 2.2 2.1 2.1) Pace Bed(A) facedown onto a clean, non-marring surface. 2.2) Attach Legs(B) to Bed(A) using Bolts(①), and Washers(②) with Allen Key(③) as pictured above. Do not fully tighten the Bolts. Step 3 In a sequential manner, gradually tighten all Bolts until evenly secured. Inspect the Dog Bed and make sure all parts are adequately connected. Place Cushion(C) onto Bed(A) as shown in picture. Your Dog Bed is ready for use. This Dog Bed can only be used on a flat, level surface.
PAGE 5
Page 5 of 5