Installation & Assembly

3
c
PARTS NAME QTY
3 S 3-Way Straight ( 2 )
A 3 5 Long Tube ( 1 )
B40 Long Curve ( 4 )
R1 Roof ( 1 )
To form the ROOFTOP, you will
need these pieces:
3
b
PARTS NAME QTY
4 C 4-Way Corner ( 2 )
5 C 5-Way Corner ( 2 )
A35 Long Tube ( 4 )
D1 Hideaway Den ( 1 )
To form the2nd floor HIDEAWAY,
you will need these pieces:
B 4 0
3 S
3S
A 3 5
R 1
A 3 5
5C
5C
4 C
4 C
D 1
Insert the tubes into the sleeves, add the
connectors and form the top of the hideaway.
Add to the assembled unit.
Orient the B40 curve tubes
vertically. The longer portion
creates the height of the roof.
Insert the tubes into the roof
panel, add the connectors and
form the rooftop.
Add to the assembled unit.
Secure the velcro flap at the
bottom of the roof fabric onto
the top of the hideaway.
A 3 5
3
a
PARTS NAME QTY
A 35 Long Tube ( 6 )
To start the2nd floor, you will
need these pieces:
Add these vertical posts to
the first floor as shown.
REMINDER: Insert tubes into the
fabric first, then add connectors.
⁕