Installation & Assembly

Flight Cage
Lay one side frame on its side, attach the storage shelf with a
hex screw, then add and attach the opposite side frame.
Attach the frame rail
with hex screws.
Carefully flip the
base stand unit
over...
...and attach the storage
shelf and the remaining
frame rail with hex screws.
With the cage still on its side, add the
rolling casters into the frame legs.
Set the completed stand unit aside.
Orient the lower side panel with the
grille/tray track facing the cage interior
and the open end facing the cage front.
Align the extended wires on the side
panel with the holes on the back panel
frame.
With the side panel inserted, lean the
back panel forward and let gravity hold
the pieces in position while attaching
together with a hex screw.
Leave the unit leaning forward.
Orient the upper side panel with the
food/water cup door opening out to
the cage exterior.
Align the extended wires, insert
the panel in place, and attach with
a hex screw.
Leave the unit leaning forward.
Install and attach the opposite
side panels in the same order and
method.
1
To assemble the STAND UNIT,
you will need these pieces:
2
a
To assemble the CAGE UNIT,
you will need these pieces:
read first
REVIEW BEFORE
ASSEMBLY
• TOOLS: An allen wrench and a
crescent wrench are included.
• Instructions are the same for
Flight Cage models #F046 and
#F047. They differ in color only.
• Assembly steps that would be
easier with a second person
are indicated with this symbol.
× 8
× 4
× 4