Installation & Assembly

• Place plants and décor items into
each aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
• Place lter cartridge in slots in lter
chamber to t securely.
• The word “FRONT” on lter
cartridge should face the aquarium
chambers for proper t.
6. add Filter Cartridge
• Place plants and décor items into
each aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
• Place lter cartridge in slots in lter
chamber to t securely.
• The word “FRONT” on lter
cartridge should face the aquarium
chambers for proper t.
6. add Filter Cartridge
• Place lter cartridge in slots in lter
chamber to t securely.
• The word “FRONT” on lter
cartridge should face the aquarium
chambers for proper t.
6. add Filter Cartridge
• Using a net, carefully remove betta from store
container and gently place it in one aquarium
chamber
. Place cover on aquarium chamber.
WARNING: Only ONE betta should be in each
aquarium chamber.
7. add Covers and Turn Power On
Adjust ow rate of pump as needed
• Place covers on lter chamber and each
of the three aquarium chambers beginning
with the third (end) aquarium chamber.
• Plug power cord into proper outlet using
“drip loop” method (see above).
Flow Rate
Adjustment
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
• Pour room-temperature water into
aquariums over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner to lter
chamber.
• Place lter cartridge in slots in lter
chamber to t securely.
• The word “FRONT” on lter
cartridge should face the aquarium
chambers for proper t.
6. add Filter Cartridge
• Remove aquarium chamber covers.
• Test water in aquarium chambers to be sure it is
approximately the same temperature as the water
that the betta is in.
• Add an ounce of aquarium water to the water
the betta is in. Wait 5 minutes. Repeat.
8. add Fish
5. add Water to Aquarium Chambers
Add Water Conditioner to lter chamber
as directed
• Using a net, carefully remove betta from store
container and gently place it in one aquarium
chamber
. Place cover on aquarium chamber.
WARNING: Only ONE betta should be in each
aquarium chamber.
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
• Pour room-temperature water into
aquariums over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner to lter
chamber.
• Place lter cartridge in slots in lter
chamber to t securely.
• The word “FRONT” on lter
cartridge should face the aquarium
chambers for proper t.
6. add Filter Cartridge
• Remove aquarium chamber covers.
• Test water in aquarium chambers to be sure it is
approximately the same temperature as the water
that the betta is in.
• Add an ounce of aquarium water to the water
the betta is in. Wait 5 minutes. Repeat.
8. add Fish
5.
add Water to Aquarium Chambers
Add Water Conditioner to lter chamber
as directed
• Using a net, carefully remove betta from store
container and gently place it in one aquarium
chamber
. Place cover on aquarium chamber.
WARNING: Only ONE betta should be in each
aquarium chamber.