Installation & Assembly
• Place plants and décor items into
each aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
See reverse for additional information.
• Place plants and décor items into
each aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
See reverse for additional information.
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
• Place plants and décor items into
each aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
See reverse for additional information.
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
• Place plants and décor items into
each aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
• Pour room-temperature water into
aquariums over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner to lter
chamber.
• Place lter cartridge in slots in lter
chamber to t securely.
• The word “FRONT” on lter
cartridge should face the aquarium
chambers for proper t.
6. add Filter Cartridge5. add Water to Aquarium Chambers
Add Water Conditioner to lter chamber
as directed
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
• Place plants and décor items into
each aquarium in desired location.
• Cover base of plants and bottom
of décor items with gravel to hold
securely in place.
• Pour room-temperature water into
aquariums over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner to lter
chamber.
• Place lter cartridge in slots in lter
chamber to t securely.
• The word “FRONT” on lter
cartridge should face the aquarium
chambers for proper t.
6. add Filter Cartridge5. add Water to Aquarium Chambers
Add Water Conditioner to lter chamber
as directed
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
lter chamber until it lls completely without
overowing in the aquarium chamber.
• Once water in lter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
• Pour room-temperature water into
aquariums over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner to lter
chamber.
4. add Water to Filter Chamber
5. add Water to Aquarium Chambers
Add Water Conditioner to lter chamber
as directed
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
lter chamber until it lls completely without
overowing in the aquarium chamber.
• Once water in lter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
• Pour room-temperature water into
aquariums over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner to lter
chamber.
4. add Water to Filter Chamber
5. add Water to Aquarium Chambers
Add Water Conditioner to lter chamber
as directed
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
lter chamber until it lls completely without
overowing in the aquarium chamber.
• Once water in lter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
• Pour room-temperature water into
aquariums over your hand to avoid
moving gravel, plants and décor.
• Fill aquarium with water to 1/2"
from top of frame.
• Add water conditioner to lter
chamber.
7. add Covers and Turn Power On
Adjust ow rate of pump as needed
• Remove aquarium chamber covers.
• Test water in aquarium chambers to be sure it is
approximately the same temperature as the water
that the betta is in.
• Add an ounce of aquarium water to the water
the betta is in. Wait 5 minutes. Repeat.
• Place covers on lter chamber and each
of the three aquarium chambers beginning
with the third (end) aquarium chamber.
• Plug power cord into proper outlet using
“drip loop” method (see above).
8. add Fish
4. add Water to Filter Chamber 5. add Water to Aquarium Chambers
Add Water Conditioner to lter chamber
as directed
Flow Rate
Adjustment
• Using a net, carefully remove betta from store
container and gently place it in one aquarium
chamber
. Place cover on aquarium chamber.
WARNING: Only ONE betta should be in each
aquarium chamber.
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
lter chamber until it lls completely without
overowing in the aquarium chamber.
• Once water in lter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
7. add Covers and Turn Power On
Adjust ow rate of pump as needed
• Place covers on lter chamber and each
of the three aquarium chambers beginning
with the third (end) aquarium chamber.
• Plug power cord into proper outlet using
“drip loop” method (see above).
4. add Water to Filter Chamber
Flow Rate
Adjustment
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
lter chamber until it lls completely without
overowing in the aquarium chamber.
• Once water in lter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
7. add Covers and Turn Power On
Adjust ow rate of pump as needed
• Place covers on lter chamber and each
of the three aquarium chambers beginning
with the third (end) aquarium chamber.
• Plug power cord into proper outlet using
“drip loop” method (see above).
4. add Water to Filter Chamber
Flow Rate
Adjustment