Installation & Assembly

ManualsBrandsTucker Murphy Pet ManualsFishHalterman Betta Falls Novelty Aquarium Tank

• Place aquarium evenly on a level

surface so that all sides of aquarium

are supported.

• Surface should be able to easily

support more than 50 lbs.

Make sure surface is level

• Carefully pour rinsed gravel

into middle of each aquarium.

• Spread gravel evenly

around aquarium bottom.

• Gravel depth should measure

about 1" from the bottom.

Betta

Falls

• Place aquarium evenly on a level

surface so that all sides of aquarium

are supported.

• Surface should be able to easily

support more than 50 lbs.

Make sure surface is level

• Carefully pour rinsed gravel

into middle of each aquarium.

• Spread gravel evenly

around aquarium bottom.

• Gravel depth should measure

about 1" from the bottom.

Betta

Falls

See reverse for additional information.

• Place aquarium evenly on a level

surface so that all sides of aquarium

are supported.

• Surface should be able to easily

support more than 50 lbs.

Make sure surface is level

1. place aquarium on Strong, Stable Surface

Betta

Falls

• Place aquarium evenly on a level

surface so that all sides of aquarium

are supported.

• Surface should be able to easily

support more than 50 lbs.

Make sure surface is level

Fill to “Max” level on indicator

• Slowly pour room-temperature water into

lter chamber until it lls completely without

overowing in the aquarium chamber.

• Once water in lter chamber has emptied,

check “Max” level indicator to see if more

water should be added. If so, repeat step

above until water level reaches “Max”.

4. add Water to Filter Chamber

• Place aquarium evenly on a level

surface so that all sides of aquarium

are supported.

• Surface should be able to easily

support more than 50 lbs.

Make sure surface is level

Fill to “Max” level on indicator

• Slowly pour room-temperature water into

lter chamber until it lls completely without

overowing in the aquarium chamber.

• Once water in lter chamber has emptied,

check “Max” level indicator to see if more

water should be added. If so, repeat step

above until water level reaches “Max”.

4. add Water to Filter Chamber

Summary of content (3 pages)

PAGE 1
Betta Falls Betta Falls Make Makesure suresurface surfaceisislevel level ••Place Placeaquarium aquariumevenly evenlyononaalevel level surface surfacesosothat thatallallsides sidesofofaquarium aquarium are aresupported. supported. ••Surface Surfaceshould shouldbebeable abletotoeasily easily support supportmore morethan than50 50lbs. lbs. 4.add add Water Wateronto to Filter Filter Chamber Chamber 1. 4.
PAGE 2
4. add Wateron to Filter Stable Chamber 1. place aquarium Strong, Surface Fill to “Max” level on indicator Make sure surface is level • Slowly pour room-temperature water into Carefully Carefully pour pourrinsed rinsedgravel gravel ••Place aquarium evenly on a level filter chamber until it fills completely without into intomiddle middle of of each each aquarium. aquarium. surface so that all sides of aquarium overflowing in the aquarium chamber. are supported.
PAGE 3
6. add Filter 5. addWater WaterCartridge to to Aquarium Aquarium Chambers Chambers 5.add 7. and Turn Power On 6. 6.add add addCovers Filter Filter Cartridge Cartridge Flow Rate Adjustment Add AddWater WaterConditioner Conditionertotofilter filterchamber chamber asasdirected directed Adjust flow rate of pump as needed • Place filter cartridge in slots in filter • Place plants and décor items water into into ••Pour Pour room-temperature room-temperature chamber to fit securely.