Installation & Assembly

12
Connect (1) 19 7/8" Rail to
(1) 33 1/4" Post with the
Elbow. Add (1) Rail
Connector to open end of
post facing the direction
indicated below.
13
Snap parts from Step 12 to gate opening. Secure with
provided screws.
14 15
Insert Hinge Brackets into the gate
panel assembled in Step 14. Attach
to enclosure as shown below and
secure with provided screws.
Connect (2) 19 1/2" Gate
Rails to (2) 28 1/2" Gate
Posts using the included
Hinge Elbows. IMPORTANT:
Holes in Elbows must be
facing up and down to
attach to hinges properly.
(1) Elbow
(1) 33 1/2" Post
(1) 19 7/8" Rail
(1) Rail Connector
(4) Hinge Elbows
(2) 19 1/2" Gate Rails
(2) 28 1/5" Gate Posts
(2) Hinge Brackets