Installation & Assembly

8
Connect (4) 3-Way Elbows to the
corners of your enclosure.
9
Connect (7) Tee's to the center
posts as shown below. Exclude the
center post at the front of your
enclosure.
(7) Tees
10 11
Attach (11) 46" Rails to the top of
your enclosure using a rubber
mallet. Leave only the space where
your gate will be installed open.
(11) 46" Rails
(4) 3-Way Elbows
Attach (1) Elbow to the
remaining post top. Face it
as shown below.
(1) Elbow