Installation & Assembly

4
Slide parts from Step 3 over Corner Posts
to the bottom of your enclosure. Secure
into place with provided screws.
5
Connect (2) Rail Connectors to
each side of a 46" Post. Be sure
that the opening faces the same
direction on each end. Repeat four
times.
(4) 46"" Posts
(8) Rail Connectors
6
Attach parts from Step 5 to the
remaining openings of your enclosure.
Secure into place with provided screws.
7
Connect (2) Rail Connectors to
each side of a 46" Post. Be sure
that the opening faces the same
direction on each end. Repeat four
times.
(4) 46"" Posts
(8) Rail Connectors