Assembly Instructions

ManualsBrandsTucker Murphy Pet ManualsAll Bird CagesBremer Bird Cage

Aviary Assembly Instructions

1 Front Panel

1 Back Panel

2 Side Frames

2 Wire Side Panels

1 Wire Roof Section

1 Wire Grill

2 Metal Sliding Trays

2 Wooden Perches

1 Seed Guard Set

4 Rolling Casters

CAGE COMPONENTS

1 Hex-Head Wrench

1 Wire Grill Safe-Clip

4 Stainless Steel Feeders

1 Bag Assorted Steel Nuts/ Bolts

Step 1:

Put the 2 Side Frames into Front an

Back panel, and secure with steel screws.

Step 2:

(1) Slide 2 Wire Side Panels into the 2 Side

Frames.

(2) Attach the grill safe-clip onto the horizontal

"short-wire" provided on the bottom of the cage

front panel. (Note - the safe-clip prevents the

grill from being pushed out by larger, more

aggressive birds).

(3) Attach 4 Rolling Casters into each of the legs.

Step 4:

(1) Fit the Wire Roof Section into 4 holes provided i

Front and Back Panel, and secure with steel Nuts.

(2) Slide Wire Grill and Metal Trays into place as shown.

(3) Put Feeders and Perches into position.

Step 5

Push Safe-Clip to the handle provided i

Wire Grill as shown.

ow, your new aviary is ready to use.

Step 3:

(1) Fit together 2 halves of U-bar.

(2) Secure entire U-

ar assembly to the back of the playtop

frame with steel screws and nuts. Use the screws on the

curved “bottom” of the U-bar assembly and attach it so the

two ends are facing the front of the cage.

(3) Screw on the support bar with the food/water cup holders &

perch holder. The bar screws on to the front of the U-

assembly, so the perch holder is slightly above the U-

assembly. Insert one end of ladder into front of U-

assembly and the other end into the two small holes on the

front of the playtop frame.