Assembly Instructions

ManualsBrandsTucker Murphy Pet ManualsAll Bird CagesBremer Bird Cage

Step 6:

Push Safe-Clip to the handle provided i

Wire Grill as shown.

ow, your new avia

y is ready to use.

CAGE COMPONENTS

1 Top Front Panel

1 Bottom Front Panel

1 Top Back Panel

1 Bottom Back Panel

2 Side Frames

2 Wire Side Panels

1 Wire Roof Section

1 Wire Grill

2 Metal Sliding Trays

2 Wooden Perches

1 Seed Guard Set

4 Rolling Casters

1 Hex-Head Wrench

1 Wire Grill Safe-Clip

4 Stainless Steel Feeders

1 Bag Assorted Steel Nuts/ Bolts

Step 1:

(1) Fit Top Front Panel into Botto

Front Panel, and secure with steel Nuts.

(2) Fit Top Back Panel into Bottom Bac

Panel, and secure with steel Nuts.

Step 2:

Attach the 2 Side Frames into

Front and Back Panel, an

secure with steel Nuts as

shown.

Step 3:

(1) Slide 2 Wire Side Panels into the 2 Side

Frames.

(2) Attach the Grill Safe-Clip onto the

horizontal “short-wire” provided on the

bottom of the cage Front Panel by using

Hex-Head Wrench provided. Hand tighte

the Safe-Clip in position as shown. (do no

over-tighten) (Note-The Safe-Clip prevents

Grill from being pushed out by larger more

aggressive birds.)

(3) Attach 4 Rolling Casters into each of the

legs.

Step 5:

(1) Fit the Wire Roof Section

into 4 holes provided in

Front and Back Panel, an

secure with steel Nuts.

(2) Attach handles into Metal

Trays, and secure with steel

Nuts as shown.

(3) Slide Wire Grill and Metal

Trays into place as shown.

(4) Put Feeders and Perches into

position.

Step 3:

(1) Fit together 2 halves of U-bar.

(2) Secure entire U-

ar assembly to the back of the playtop frame with

steel screws and nuts. Use the screws on the curved “bottom” o

the U-bar assembly and attach it so the two ends are facing the

front of the cage.

(3) Screw on the support bar with the food/water cup holders & perch

holder. The bar screws on to the front of the U-

ar assembly, so the

perch holder is slightly above the U-

ar assembly. Insert one end o

ladder into front of U-bar assembly and the other end into the two

small holes on the front of the playtop frame.

Aviary Assembly Instructions