Installation & Assembly
Flip the sides up. Push the tabs into the slots until they click.
Make the following shape combinations.
Take note that some ends do not finish with rings (see #3, #4, & #6).
They will be used in the assembly in this order.
Pre-assemble the House
Pre-assemble the Tunnel Trails
8 half-piece straights
18 rings
24 half-piece curves
Pre-assemble the two Exercise Wheels
KEY:
B = Base
C = Clips
LM = Lower Mesh
UM = Upper Mesh
R = Roof
PR = Platform
& Ramp
W = Wheel
H = House
T = Tunnel
PRE-ASSEMBLY
Align the pegs on the underside
of the roof into the slots on the
side walls until they click.
Snap the covers onto the wheel bases.
123456
Both types of tunnel
half-pieces have pegs on
one end and receiving
holes on the other.
Align pegs with holes and
click together.
Add the ring on one end
to hold pieces together.
Hamster
Playhouse
TOOLS : No tools are required • For best results, follow Assembly Steps in order presented.
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact us.
Made in China