Installation & Assembly

]Cc
3
PIECES
Assembly completed. {
4
PIECES
]Pc
Cups/cup holders:
O
pen the cup door.
Insert the screw posts
on the cup holder
through the door mesh,
add the bracket on the
outside, and tighten to
t
he doors with the
wing nuts.
Place the deep cups
into the holders.
Grille and tray:
Open the grille lock.
Slide the grille
(with handle) into
the top channel and
the deep tray into
the bottom channel.
Perch:
H
old the perch in place in the cage interior.
Install a Phillips-head screw through the
bracket, through the cage wire, into the
perch bracket and tighten with a Phillips
screwdriver for all four screws.
Back the Phillips-head screws out
on the underside of the perch bar
and attach the cup holders.
Loosen the knob screws on
the perch bar rail and along the
cage front. Insert the ladder and
re-tighten the knob screws.
Attach the perch bar to the
support rails using the hex screws
and the allen wrench.
Insert the shallow cups.
Open the grille lock. Slide the
thin grille into the top channel
and the shallow tray into the
bottom channel.
Remove the hex screws from the
ends of the perch bar supports.
Install the perch bar supports on
the back panel of the cage.
When fully assembled, check and tighten
ALL screws and wing nuts over the entire cage
to ensure a safe and stable home.
⁕
For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals, visit our websites.