Installation & Assembly

KEY:
B = Back panel
F = Front panel
LS = Left side
panel
RS = Right side
panel
R = Roof grille
C = Casters
CC = Cage
Components
PC = Playtop
Components
TOOLS NEEDED : Phillips head screwdriver • For best results, follow Assembly Steps in order presented.
2
PIECES
Stainless Steel
Playtop Home
]R
]B
]Ls
]Rs
]F
]C
Screws are installed in place. When attaching panels or components,
back the screw out, match up the components, and reinsert to attach.
⁕
In most cases, we recommend
two people assemble this cage.
⁕
While the lockable rolling
casters can be added at
any point in the assembly,
we recommend installing
them at this time.
Screw the threaded caster
post into the frame leg at
each corner. If preferred,
tighten each caster with a
slim wrench.
Back the Phillips-head screws out,
align the side panel with the front
panel, and re-tighten the screws to
attach.
Repeat this method for
all panels to assemble
the cage body.
Note: Small loop on
the back panel should
face the interior. This
loop helps hold the
bottom grille in place.
Set the cage roof grille in
place and attach with the
Phillips-head screws.
1
PIECES
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact us.
Made in China