Installation & Assembly

Stainless Steel

Playtop Home

PARTS LIST

]Pc

]Cc

]Ls

]Rs

Phillips-head screws

18 pcs (installed in place

on cage panels) *

Hex screws

4 pcs (installed in place

on playtop supports)

Knobs

4 pcs (installed in place

on cage & playtop bar)

* (plus 2 bagged extras)

Casters

4 pcs

HARDWARE

INCLUDED:

TOOLS

INCLUDED:

KEY:

B = Back panel

LS = Left Side panel

F = Front panel

RS = Right Side panel

R = Roof grille

C = Casters

PC = Playtop Components

CC = Cage Components

Allen wrench

TOOLS NOT

INCLUDED:

Phillips-head

screwdriver

CUSTOMER SUPPORT

For assistance or replacement parts,

please contact us.

Made in China

PAGE 1
Stainless Steel Playtop Home CUSTOMER SUPPORT For assistance or replacement parts, please contact us.
PAGE 2
Stainless Steel Playtop Home CUSTOMER SUPPORT For assistance or replacement parts, please contact us. TOOLS NEEDED : Phillips head screwdriver • For best results, follow Assembly Steps in order presented. KEY: B = Back panel F = Front panel LS = Left side panel RS = Right side panel 1 R = Roof grille C = Casters CC = Cage Components PC = Playtop Components ⁕ ⁕ In most cases, we recommend two people assemble this cage. Screws are installed in place.
PAGE 3
PIECES ] Cc Perch: Hold the perch in place in the cage interior. Install a Phillips-head screw through the bracket, through the cage wire, into the perch bracket and tighten with a Phillips screwdriver for all four screws. Cups/cup holders: Open the cup door. Insert the screw posts on the cup holder through the door mesh, add the bracket on the outside, and tighten to the doors with the wing nuts. Place the deep cups into the holders. Grille and tray: Open the grille lock.