Installation & Assembly

2
Assemble the cage SIDES.
You will need these pieces:
Guide the LS2 side panel into
place down through the brackets.
Make sure the panel is oriented so
that the cup door can be operated
from the exterior.
Make sure the panel is centered
in all brackets on both sides.
At the base of the panel, insert
the extended center wires into
the holes on the frame rail.
The LS3 frame rail has
small holes along the top
and bottom surfaces.
wires into the holes on
the frame rail and attach
the rail with long screws.
Guide the LS4 side panel
into place down through
the brackets and insert the
extended wires into the
holes on the frame rail.
Cap the LS4 side panel
with the LS5 frame rail.
Align the holes with the
extended wires; attach
the rail with long screws.
Follow the same assembly
method for the right side,
with the RS2, RS3, RS4 and
RS5 panels and frame rails.
]Ls
2
]Rs
2
]Ls
3
]Ls
4
]Ls
5
]Rs
3
]Rs
4
]Rs
5
[ 8 ] LONG
For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals
Insert the extended center