Installation & Assembly

ManualsBrandsTucker Murphy Pet ManualsAll Bird CagesChao Charming Aviary Large Flight Cage with Wheels/Casters

FRIEND ME!

5...

6...

7...

8...

9...

10...

Follow this flight path

INCLUDED

READ THESE INSTRUCTIONS!

HELPFUL TOOLS

An allen wrench is included with the hardware.

You will need a small adjustable wrench for the roof assembly.

FIND A FRIEND (or GO IT ALONE—both are OK)

If you follow these steps, cage assembly will be easy for one person. But you

may find a second person’s assistance useful in some steps. Look for this

symbol:

REVIEW ALL PARTS & HARDWARE

After unpacking all components, review all parts and count the contents of

the screw packets and compare the quantities against the Hardware List on

the Parts List page.

READ!

EASY AS 1-2-3 !

NEEDED

For assembly of your Charming Aviary MODEL Large / Extra-Large

line .

Made in China

the size and dimension of parts.

These assembly steps have been compiled to lead you to a successful

assembly. If you still have questions, please call our Customer Service

Aviary cages are the same. The only difference is

these

Assembly for

if any problems or issues arise.

Please contact

Summary of content (9 pages)

PAGE 1
For assembly of your Charming Aviary MODEL Large / Extra-Large Follow this flight path READ! 1 READ THESE INSTRUCTIONS! READ! Assembly for these Aviary cages are the same. The only difference is the size and dimension of parts. READ! These assembly steps have been compiled to lead you to a successful assembly. If you still have questions, please call our Customer Service line . INCLUDED HELPFUL TOOLS 2 An allen wrench is included with the hardware.
PAGE 2
For assembly of your Charming Aviary MODEL Large / Extra-Large Follow this flight path 5 CARE FOR BIRDS CAGE PLACEMENT Place the cage away from drafts and drafty areas and out of harsh or direct sun. Keep the cage away from strong fumes and odors. CUSTOMER SUPPORT Please contact us. These instructions are online, under the item’s detail listing. ACTIVITY TOYS Activity toys are vital for maintaining a bird’s mental and physical health.
PAGE 3
CHARMING AVIARY PARTS LIST ] Rs 5 ] B ] Rs 4 ] Ls 5 ] F ] Rs 3 ] Ls 4 ] Rs 2 ] Ls 3 ] Rs 1 ] Ls 2 ] Ls 1 Made in China
PAGE 4
CHARMING AVIARY PARTS LIST HARDWARE INCLUDED: ] R4 ] R2 Long Screws 12 pcs +1 (Step 1 & Step 2) Short Screws with Nuts 7 pairs +1 ] R1 ] R3 (Step 4) KEY: R = Roof Pieces F = Front Panel B = Back Panel LS = Left SIDE Pieces RS = Right SIDE Pieces G = Grille T = Tray ] G ] T For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals
PAGE 5
Charming Aviary Models: Large / Extra-Large 1 Assemble the CAGE FRAME. You will need these pieces: ] B ] F ] Rs 1 ] Ls 1 [ 4 ] LONG Attach the front and back frame panels together with the LS1 and RS1 framing rails. These frame rails have channels to hold the grille and tray. Orient the rails with the channels facing the interior of the cage and the two small holes facing up. Secure the rails in place with long screws. Gently lay the cage on its side.
PAGE 6
2 Assemble the cage SIDES. You will need these pieces: Guide the LS2 side panel into place down through the brackets. Make sure the panel is oriented so that the cup door can be operated from the exterior. Make sure the panel is centered in all brackets on both sides. At the base of the panel, insert the extended center wires into the holes on the frame rail. ] Ls 2 [ 8 ] LONG ] Rs 5 ] Rs 4 The LS3 frame rail has small holes along the top and bottom surfaces.
PAGE 7
3 Install the ACCESSORIES. You will need these pieces: TOY RAIL Hook the toy rail over the top horizontal wire of the side panels. PERCHES Install the perches anywhere in the cage by inserting the slotted ends onto a vertical wire. Rest the perch on a horizontal wire for stability. ] G ] T FOOD/WATER CUPS Slide the cup door open and hook the cups onto the horizontal wire at the base of the opening.
PAGE 8
4 Assemble the ROOF. You will need these pieces: ] R1 ] R2 Overlap the R2 roof panel with the R1 roof panel. Align the holes at the center. Insert a short screw from the top, and tighten the nut from the underside. [ 7 ] SHORT with Nuts Attach the R3 roof brace. Make sure the top horizontal flaps are oriented toward the interior / center, and the lower horizontal flap is facing the exterior / outer edge. Align the holes and attach with short screws from the top and nuts from the underside.
PAGE 9
4 ...continued Tip the assembled roof into position by catching the lower horizontal flap on the R3 roof brace under the front panel frame rail. On the back end, the vertical panel will slip straight down into place on the interior side of the frame. H Your aviary is now fully assembled and ready for use.