Installation & Assembly

]Pc
]Cc
Cups/cup holders:
Open the cup door.
Insert the screw posts
on the cup holder through
the door mesh, add the
bracket on the outside,
and tighten to the doors
with the wing nuts.
Place the deep cups
into the holders.
Grille and tray:
Open the grille lock. Slide
the grille (with handle)
into the top channel and
the deep tray into the
bottom channel.
Perch:
H
old the perch in place in the cage interior. Install a
Phillips-head screw through the bracket, through the
cage wire, into the perch bracket and tighten with a
Phillips screwdriver for all four screws.
Back the Phillips-head screws out
on the underside of the perch bar
and attach the cup holders.
Loosen the knob screws on
the perch bar rail and along the
cage front. Insert the ladder
and re-tighten the knob screws.
Attach the perch bar to the
support rails using the hex
screws and the allen wrench.
Insert the shallow cups.
Open the grille lock. Slide the
thin grille into the top channel
and the shallow tray into the
bottom channel.
Remove the hex screws from the
ends of the perch bar supports.
Install the perch bar supports on
the back panel of the cage.
Assembly completed.
When fully assembled, check and tighten
ALL screws and wing nuts over the entire cage
to ensure a safe and stable home.
⁕
4
PIECES
5
PIECES
Made in China