Installation & Assembly

]B
2
]B
1
]F
2
]F
1
]Ls
1
]Ls
2
]Rs
1
]Rs
2
KEY:
B = Back panels
LS = Left side
panels
F = Front panels
RS = Right side
panels
R = Roof grille
C = Casters
PC = Playtop
Components
CC = Cage
Components
TOOLS NEEDED : Phillips head screwdriver • For best results, follow Assembly Steps in order presented.
Stainless Steel
Playtop Home
Screws are installed in place. When attaching panels or components,
back the screw out, match up the components, and reinsert to attach.
⁕
In most cases, we recommend
two people assemble this cage.
⁕
1
PIECES
Back the Phillips-head screws
out, align the upper panel with
the lower panel and retighten
the screws to attach.
Continue attaching all upper panels to lower
panels before continuing to the next step.
Grille/tray tracks on all side
panels should be on the same
side, facing the interior.
Note: Small loop on the
back panel should face
the interior. This loop
helps hold the bottom
grille in place.
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact us.
Made in China