Assembling Instruction

Aufbauanleitung/Assembling Instruction/Instruction de montage



Work Steps:

First Step

Please use a stud ﬁnder (or other technique) and a pencil. After locating the stud

mark the center of the stud, which will hold the product.

Second Step

Assemble the parts as shown in the manual.

Third Step

Bring the products in ﬁnal position and mark the screw-point on the center of the

studs. Use a spirit level or have someone eyeball to make sure the holes are levelled.

Fourth Step

Use your drill and the 1/16“ bit to make pilot holes for maximum 2 inch to all

markings.

Fifth Step

Mount the metal holder with enclosed screws to the stud and make sure the screws

are fastened securely. Mount the small platform with the wooden screws directly to the stud.

Final Step

Connect the large platform and steps with the holders in the wall.

Advice:

Please note the secure assembly and mounting requires one adult person.

The holder need to be ﬁxed to the wooden studs at 12 or 16 inch.

For drywalls with metal studs, please use 2 inch. metal screws (not included).

For connection to rocksheet only, please use drywall anchors and screws with ample load capacity