Assembling Instruction

Item No.
Pos. No.
Description
Measurement Quantity Item No.
Pos. 1
Upper front panel
843 × 472 × 25 mm 1
Pos. 2
Upper back panel
843 × 517 × 25 mm 1
Pos. 3
Bottom panel, front/back
843 × 523 × 25 mm 2
Pos. 4
Left side panel
971 × 716 × 25 mm 1
Pos. 5
Right side panel
971 × 716 × 25 mm 1
Pos. 6
Drawer with metal inlay
840 × 448 × 40 mm 1
Pos. 7
Middle floor, backside
840 × 241 × 13 mm 1
Pos. 8
Bottom panel for nest box
543 × 287 × 26 mm 1
Pos. 9
Left panel, nest box
30 × 306 × 300 mm 1
Pos. 10
Right panel, nest box
30 × 306 × 300 mm 1
Pos. 11
Back panel, nest box
30 × 280 × 546 mm 1
Pos. 12
Roof plate of nesting box
326 × 18 × 636 mm 1
Pos. 13
Middle partition wall, nest box
288 × 248 × 5 mm 1
Pos. 14
Roof ridge
69 × 45 × 792 mm 1
Pos. 15
Ramp
895 × 20 × 208 mm 1
Pos. 16
Roof plate, left
494 × 18 × 766 mm 1
Pos. 17
Roof plate, right
494 × 18 × 766 mm 1
Pos. 18
Roosting Pole
40 × 40 x 857 mm 1
4. Screw the roof plate of the nesting box (12) to the left side
panel.
1. Assemble the nesting box: Connect both side panels
(Pos.9/10) with the back wall (11) and the bottom plate (8).
Insert the partition wall (13). Then connect the left side panel
of the coop (4) with the nesting box
49 × 42 × 31 inch
125 × 107 × 79 cm
2. Fasten the upper and top front and back panel (1+3/2+3), as
well as the right side
panel (5) of the sleeping house.
3. Put in the ramp (15) and srew it. Insert the drawer (6) and
fasten the roosting pole. (18)
Chicken hutch