Assembly Instructions

ImPortAnt InformAtIon
PArts IdentIfIcAtIon
Remove contents of the packing carton. Locate the
Exercise Pen (8 connected panels), the Ground Anchors
& Snaps.
The Exercise Pen can be set up in many different
configurations. Decide what configuration you’d like to
use and set up the pen. (Note: The pen can be moved
and reconfigured after it has been assembled.)
Connect the two ends with the Snaps as shown in
picture. For best results, place Snaps at top and bottom
between the two closely spaced wires, and space the
remaining two Snaps evenly along the middle wires.
1.
2.
3.
Assembly InstructIons
A. (1) Exercise Pen B. (8)- Ground Anchors C. (4) Snaps
(8 connected panels)
Assembly Instructions
Remove collars, tags, and leads from pet before placing it in the home to prevent possible entanglement. DO NOT
leave young animals unsupervised for extended periods of time. This manufacturer's main concern is your pet’s
well-being.
If your pet has never been kept in any enclosure, specific training may be necessary for your pet’s safety. A pet, not
specifically trained to be restricted, may attempt to escape from this enclosure, which could cause serious injury to
your pet or this product. They will not accept liability or warrant any loss due to improper use of this product by apet
that has not been properly trained.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case
of return or exchange, failure to return product in similar condition as received could result in limited reimbursement.
Please save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If
you discover any parts are missing, immediately call our toll-free service helpline.