Owner's manual

Lydkraft ApS

Mose Allé 20, DK 2610 Rødovre

Denmark

CONTROLS:

GAIN: The gain switches have a range from +10dB to +70dB.

Coarse gain 10dB/steps (20-60ddB) and

Fine gain 2dB/step (-10dB to +10dB).

LF cut: The high pass filter is selectable between off, 20Hz (12dB/octave) and

40Hz (6dB/octave).

Phantom: The phantom switch switches the +48V DC power on and off.

The +48V DC is supplied to the microphone input via two 6,81 K resistors.

PAD: This switch places a -20dB attenuation between the microphone and

the input transformer.

PHASE: Reverses the phase by 180 degrees on the mic input.

The DI input is unaffected.

IMPEDANCE: The mic. input load impedance can be selected between 600, 1200 and

2400 Ohm.

(130815)