User Manual

LYDKRAFT ApS
Mose Allé 20, DK 2610 Rødovre
Denmark
3
NB:
Leave the meter swit ch i n position
compression
as it might
introduce distortion if left i n
output
position.
IN/OUT:
Switch es the compressor in and out of the signal path.
In the out position th e entire co mpressor is bypassed.
ATTACK:
The
attack
control ch ooses how fast/slow t he compressor responds to
an increase i n the input signal.
The attack control is continuously variable from 1 to 60 milliseconds.
RELEASE:
The
release
control ch ooses how fast/slow t he compressor responds to a
decrease in the input signal.
The release control is continuously variable from 0,06 to 2 seconds.
ATTACK/RELEASE SELECT:
This switch selects h ow the compressor reacts to a incre ase (
attack
)or
decrease (
release
) of the input signal.
There are two sett ings of the switch:
1. Fixed.
Attack time: 3mS
Release time: 60 mS
2. Manual.
Attack time: from 1 mS to 6 0 mS
Release time: from 0.06 S to 2 S
LINK:
Interconnects several compressors on lin k 1 or link 2.
If the compressor is lef t in the off positio n, it works entirely
independently.
(981214)