Phau Ntawv Qhia

Table Of Contents
Important Safety Instruction
Copyright © 2022 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system, or transmitted in any form or by
any means, electronic, mechanical, photocopying, recording or otherwise, without the prior
written permission of LAUNCH.
Ÿ The tool is a sealed unit. There are no end-user serviceable parts inside. All internal repairs
must be done by an authorized repair facility or qualified technician. For any inquiry, please
contact the dealer.
Ÿ Keep a fire extinguisher suitable for chemical, gasoline and electrical fires nearby.
Ÿ CAUTION: Please use the included power adapter to charge your tool. No responsibility
can be assumed for any damage or loss caused as a result of using power adapters other
than the one supplied.
Before using this test equipment, please read the following safety information carefully.
ŸDo not connect or disconnect any test equipment while the ignition is on or the engine is
running.
Safety Instructions
ŸBefore starting the engine, put the gear lever in NEUTRAL (for manual transmission) or
PARK (for automatic transmission) to avoid injury.
All information, specifications and illustrations in this publication are based on the latest
information available at the time of printing. Due to continuing improvements, actual product
may differ slightly from the product described herein and LAUNCH reserves the right to make
changes at any time without prior notice.
ŸPut blocks in front of the drive wheels and never leave the vehicle unattended while testing.
Ÿ Wear an ANSI-approved eye shield when testing or repairing vehicles.
ŸAlways perform automotive testing in a safe environment.
Ÿ DANGER: Do not attempt to replace the internal rechargeable lithium battery. Risk of
explosion if the battery is replaced with an incorrect type. Contact the dealer for factory
replacement.
ŸTo avoid damaging the test equipment or generating false data, please make sure the
vehicle battery is fully charged and the connection to the vehicle DLC (Data Link
Connector) is clear and secure.
Disclaimer of Warranties and Limitation of Liabilities
ŸKeep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine
parts.
ŸAutomotive batteries contain sulfuric acid that is harmful to skin. In operation, direct
contact with the automotive batteries should be avoided. Keep the ignition sources away
from the battery at all times.
Copyright Information
ŸThe vehicle shall be tested in a well-ventilated work area, as engines produce various
poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.)
ŸDo not drive the vehicle and operate the test equipment at the same time. Any distraction
may cause an accident.
LAUNCH
Speaker
Rear Camera
Adjustable Kickstand
USB Type-C PortUSB Type-A Port
Microphone
Microphone
Front Camera
LCD Screen
Power Button
(Flip out it to any angle and
work comfortable at your desk,
or hang it on automotive part.)
Display Tablet VCI (Vehicle Communication Interface)
The display tablet acts as the central processing system, which is used to receive and
analyze the live vehicle data from the VCI and then output the test result.
Notes:
Ÿ Please use the included power adapter to charge your tool. No responsibility can be assumed for any
damage or loss caused as a result of using power adapters other than the one supplied.
For details on how to charge, refer to Section 1 “Charging & Turning On”.
Ÿ If the battery remains unused for a long period of time or the battery is completely discharged, it is
normal that the tool will not power on while being charged. Please charge it for a period of 5 minutes
and then turn it on.
Quick Start Guide
LAUNCH
Accessory Checklist
A tablet for showing
test results.
Display Tablet
Power Adapter
To supply power to the tablet
through connection to AC
outlet.
Type A to Type C Data Cable
To connect the tablet to PC to
exchange data.
Private & Confidential Sheet
A piece of paper bearing
Product S/N and Verification
Code, which is required for
your VCI activation.
Vehicle Communication
Interface (VCI) Vehicle
A device for accessing vehicle
data.
To connect the VCI device to
vehicle’s DLC.
VCI Diagnostic Cable
98********00
The following accessory items are only for reference. Please consult from the local agency or
check the package list supplied with the tool together.
6 7
8
21 3 4
5
1
(Connects to AC outlet for charging/Connects to
PC for data exchange. )
(Connects to the VCI to perform vehicle
diagnosis/Connects to compatible add-on
module or USB storage device.)
DB-15 Diagnostic Connector
Data I/O Port
The VCI dongle can work as a Vehicle Communication Interface device. It is used to read
the vehicle data and then send it to the tablet via wireless (BT) communication or data cable
connection.
(Connects it to the tablet to perform
vehicle diagnosis via the data cable.)
(Connects it to the vehicle’s DLC port via
the included diagnostic cable.)
POWER
VEHICLE
I/O
LEDs
It is defined as follows:
3. I/O:
1. Power: Illuminates solid RED when the VCI is
powered on.
Ÿ Illuminates BLUE when the VCI is working in wireless
(BT) communication mode.
2. Vehicle: Illuminates GREEN and flashes when the
VCI is communicating with the vehicle.
Ÿ Illuminates RED when the VCI is connected to the
tablet via data cable.
Note: When the VCI dongle is connected to the tablet via data cable, the system will switch
to USB mode automatically and the wireless communication becomes disabled.
Note: When connecting the non-OBD II vehicle’s DLC(Data Link Connection), please check the
type of the DLC and select the corresponding non-16pin connector or adapter cable (optional). After
use, please remember to unplug it from the vehicle’s DLC.
THANK YOU FOR CHOOSING LAUNCH!
If you have any questions or comments please forward them to:
1820 S. Milliken Ave. Ontario, CA 91761
Monday - Friday 5 am - 5 pm PST
Fax: 562-463-1590
LAUNCH Tech USA Product Support
Phone: 877-528-6249 xt: 4
Service & Repair
Monday - Friday 8 am - 5 pm PST
Please visit our public form @
http://launch.activeboard.com
Phone: 877-528-6249 xt: 5

Summary of content (3 pages)