User's Manual
Table Of Contents
- Front Cover
- Table of Contents
- List of Tables
- List of Figures
- Disclaimer
- Limited Rights Notice
- 1 Introduction
- 2 Overview
- 3 Functional description
- 4 Getting started
- 5 State machine
- 6 Creating a switch configuration
- 7 Diagnosis
- 8 Troubleshooting
- Appendix A List of Built-In Self-Tests
- Appendix B Serial terminal output at start-up
- Glossary
- References
- Index
GLOSSARY
Glossary
Entry Description
A664 A protocol standard defined by the Aircraft Data Network (ADN) subcommittee of
ARINC Airlines Electronic Engineering Committee (AEEC), but now maintained
by the Network Infrastructure and Security.
ARINC 615A Standard [1] that covers data loading over ARINC 664.
ARINC 664 Defines the use of a deterministic Ethernet network as an avionic databus in
modern aircraft.
ARINC Aeronautical Radio, Incorporated
BAG Bandwidth Allocation Gap
BE See Best-Effort Traffic.
BIST Built-In Self-Test
Best-Effort Traffic Ethernet traffic that is not critical traffic (IEEE 802.3 standard traffic). BE traffic
will be serviced with lowest priority.
CBIST Continuous Built-In Self-Test
CRC Cyclic Redundancy Check
DRAM Dynamic Random-Access Memory
ESD Electrostatic Discharge
ES End System
GND Ground
IBIST Initiated Built-In Self-Test
ICMP Internet Control Message Protocol
IEEE Institute of Electrical and Electronics Engineers
JTAG Joint Test Action Group
MACRAW MAC RAW mode
MIB Management Information Base
MSB Most Significant Bit
NC Not Connected
PBIST Power-Up Built-In Self-Test
RC See Rate-Constrained Traffic.
RFU Reserved for Future Use
© TTTech Computertechnik AG 2020. All rights reserved.
Confidential and Proprietary Information
40
Document Number:
D-A664Lab-G-05-001