User's Guide

Using Your Clever Cats
Your Clever Cats have been designed so that they can all operate simultaneously.
They use four separate channels on 2.4G frequency. If you have more than 4 Clever
Cats, you will have to use them in separate rooms, because colours which are the
same operate on the same channel.
• To switch the Clever Cats on, move the slide switch under the cats to the ON
position.
• To operate the remote control move the ON/OFF switch to the ON position
• The correct coloured remote control must be used with the cat of the same
colour for them to work.
• To enable sound on the Clever Cats move the sound ON/OFF switch to the
ON position.
• When the batteries are low, the Clever Cats will operate intermittently. Place
them into the docking station to charge the batteries.
The Clever Cats have a one button control. Press and hold the button to move
forward, release and press again and the cats will turn clockwise.
Pressandholdthebuttonagaintomove forward.If you touchor strokethetopof
the cat,the cat will make ameow sound and the cats eyes will light orange.
Your cat should move forward in a straight line, if for any reason it doesn’t, you can
adjust this leftor right by usingthe trackingdial on the reverse of the handset.
We’re delighted that this isa rechargeable resource.They don’t need batteries.
Simply place the cats back on the docking station, recharge and go.