User's Manual

To select the channel
* Turn the radio on.
* Press Channel button once, [XX] digit will blink on the LCD. XX is a channel.
* Press up[▲] or down[▼] button to choose the channel.
* Press the PTT button or Channel button to confirm.
3) VOX (Voice Operated Switching)
You do not have to operate the PTT button each time when you want to
transmit. You can also choose the VOX sensitivity so suit your environment of
operation.
( Ex : noisy road, motor bike, factory etc. )
To Set the VOX level
Vox Level can be selected by the Vox Level Switch.
“Off” means that the Vox function is disabled.
“ High” means that the Vox sensitivity is high.
“ Low” means that the Vox sensitivity is Low.
4) Call
* Click the PTT button.
5) Monitoring the Channel
It is used for listening the week signal or to here all activities on the channel by
Manually overriding channel sub tone code setting.
To activate the monitor feature
* Press and hold the “MON”(mointor) button quickly
* When you hear the sound, release the “MON” button.
To disable the monitor feature
* Press and hold the “MON”(mointor) button quickly
6) Setting FM Radio Mode
2 Way Radio mode can be converted to FM Radio Mode and at a FM Radio
Mode, when the 2 Way Radio signal comes in, the FM Radio Mode is
converted to 2 Way Radio Mode. If there is no more signal coming at a 2 Way
Radio Mode, the Radio gets back to the FM Radio Mode.
To activate the FM Radio Mode
By pressing the Monitor Button long, the 2 Way Radio Mode can be converted
to FM Radio Mode. To get back to the 2 Way Radio Mode from FM Radio
Mode, the Monitor button should be pressed long one more time.