User's Manual

1) PTT switch : Push and hold to transmit ; release to receive.
2) Power Key : Turn on or off the Power
3) Channel Key : After pressing the Channel Key, the 2 Way Radio frequency
channel can be changed by pressing the Up/Down Key. In a FM Radio Mode,
the Channel Key is used as the FM frequency seek function.
4) Call Key : A call signal is transmitted by pressing the Call Key.
5) Monitor Key : This Key is used as a Squelch On/Off function when pressed
short, and as a conversion Key of 2 Way Radio and FM Radio mode when
pressed long.
6) Up/Down Key
:
Normally the Key is used to adjust the volume but this key is
also used when setting a function.
7) Vox Level Switch : By pressing the Switch, a Vox Level ( High/Low/Off )
can be selected.
8) LCD (Liquid Crystal Display) : On the LCD, a Channel of the Radio is
displayed.
9) Transmit indicator : When transmitting signals, a red light appears on the
LCD.
3-3. SETTING AND OPERATION
In order to communicate with other GMRS/FRS units, both you and the
receiving party must be on the same channel.
GMRSWP1 has 22channels indicated by the large digits on the
LCD display panel. Before trying to transmit on the selected channel,
you should press the Monitor Button to check the activity on that channel.
If someone is already on the selected channel, you should try another
channel that is clear
1) On/Off & Volume control Switch
Radio ON : Press the power button at least for 2 seconds.You will hear
confirming melody to indicated the unit is on.
Radio OFF : Press the power button at least for 2 seconds.
Volume setting : Press up[▲] or down[▼] button to adjust a level that is most
comfortable for you while monitor is active.
2) Setting the Channel
GMRSWP1 has 22 main channels
* 22 Frequency channels ( indicated by CTC icon on the LCD )