User's Manual

128-xxxx
11 of
11
External Speaker (SPK) / Microphone (MIC) Jacks (6)
This set of jacks accepts an Audiovox headset/microphone connector.
Scan Button (13)
Press this Button momentarily to enable or disable the scan mode.
Operating Modes and Features
GRMS/FRS Operation
- From GMRS/FRS standby mode, press and hold the (PWR) button
for 2 seconds to turn on power.
- Press the MODE button so the Channel number flashes.
- Select the desired channel with the Up (10) and Down (11) Buttons.
When receiving a call, the BUSY icon on the LCD appears to indicate
incoming received signal
- Press and hold the PTT button (4) to transmit, then speak into the
microphone clearly and slowly.
- Release PTT Button (4) to receive.
- Communication can only be accomplished when the channel and
CTCSS tone frequency of at least two parties are the same.