User's Manual

5) Transmitting
* Press and hold the PTT button, the indicator ON.
* Speak slowly and clearly
* To Stop the transmission, release the PTT button.
* if there are no more receiving signal for 5 seconds, the unit will go into
power save mode.
6) Receiving
The Coding feature reduce the possibility of interference and provide enhanced
Communication. You can only listen to a call that has correct matching code.
*
Upon receiving a signal, the BUSY indicator ON.
Important :
Before transmitting or receiving to the other parties
* Correct channel is selected (1 to 22) and
7) Channel Scanning
This feature allows you to monitor all activated channels while scanning.
To activate the Scan
* Short Press the Power key button
* Radio will begin scanning.
* When in scan mode, the display will show each scanning channel.
* After an activated channel is scaned and received signal and then if there is
no more signal, the scan will resume automatically
8) Call
* Click the PTT button twice quickly.
9) Battery status indicator
The Battery icon will blink when the radio is in low battery power.
* Low battery Warning – one segments will brinking.