User's Manual

3.2 Key Function
1) PTT/ CALL key : Pressing and holding this button will allow you to speak to
any transceiver that is set to the same channel setting as
yours. The PTT Button can also be used as a two-way call
ringer. Pressing the botton twice quickly will call another
party on the same channel.
2) Up key : In the standby mode, Pressing this button will increment the litening
volume. When in function edit mode this button will be used to adj
ust the unit’s setting.
3) Down key : In the stand by mode, Pressing this botton will decrement the
listening volume. When in function edit mode this button will be
used to adjust the unit’s settings.
4) Power/Scan key : This button is used to power on/off and scan on/off. To turn
the unit on, press and hold the power on/off button for at lest
2 seconds. You will hear a confirming melody to indicate
the unit is on. To turn the unit off, press and hold the button
for at lest 2 seconds. To turn the SCAN on, press and hold
the power on/off button for at least 1 second. You will hear
a confirming tone to indicate the SCAN on. To turn the
SCAN off, press and hold the button for at lest 1 second.
5) Mode (Function) key : This button is used to select the GMRS feature settings
such as Channel selection, Roger beep on/off and VOX
on/off. To set the channel and roger beep, press
the VOX /F button within 1 second, To enable the
VOX on/off, Press the VOX /F button for 2 seconds.